Perl Modules

Introduction to Perl Modules

The Perl module packages add useful objects to the Perl language. Modules utilized by packages throughout BLFS are listed here, along with their dependencies. Installation of the modules shown on this page should be accomplished by installing the dependencies in the order listed. The Perl Module standard build and installation instructions are shown at the bottom of this page.

Archive::Zip-1.45

The Archive::Zip module allows a Perl program to create, manipulate, read, and write Zip archive files. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Archive::Zip-1.45

  • http://cpan.metacpan.org/authors/id/P/PH/PHRED/Archive-Zip-1.45.tar.gz
    MD5 sum: 07805e1c2c6b2b6561ac29489a6dd7dd

autovivification-0.14

The autovivification module allows you to lexically disable autovivification. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • autovivification-0.14

  • http://www.cpan.org/authors/id/V/VP/VPIT/autovivification-0.14.tar.gz
    MD5 sum: bf0f5133a32685218e8d7ad1aba02deb

Business::ISBN-2.09

The Business::ISBN module is for work with International Standard Book Numbers. This module and its dependency use the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Business::ISBN-2.09

  • http://www.cpan.org/authors/id/B/BD/BDFOY/Business-ISBN-2.09.tar.gz
    MD5 sum: 5ebf339c409d99cdfa6f96974ef96780

Business::ISMN-1.13

The Business::ISMN module is for work with International Standard Music Numbers. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Business::ISMN-1.13

  • http://search.cpan.org/CPAN/authors/id/B/BD/BDFOY/Business-ISMN-1.13.tar.gz
    MD5 sum: e8696a78b4aa8a99869fbb0625c5cc13

    • Tie::Cycle
      (http://search.cpan.org/~bdfoy/Tie-Cycle/)

Business::ISSN-0.91

The Business::ISSN module is for work with International Standard Serial Numbers. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Business::ISSN-0.91

  • http://www.cpan.org/authors/id/B/BD/BDFOY/Business-ISSN-0.91.tar.gz 
    MD5 sum: d1f609422d3a0ad5e301ae694d142fe4

Data::Compare-1.25

The Data::Compare module compares two perl data structures. This module and its dependencies use the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Data::Compare-1.25

  • http://www.cpan.org/authors/id/D/DC/DCANTRELL/Data-Compare-1.25.tar.gz
    MD5 sum: 6a397ab5833237f3ca05ed7277b19a7a

Data::Dump-1.22

This module provides pretty printing of data structures. It uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Data::Dump-1.22

  • http://www.cpan.org/authors/id/G/GA/GAAS/Data-Dump-1.22.tar.gz
    MD5 sum: db211fe64a5cab15b1e86e5b0dc379a4

Date::Simple-3.03

Date::Simple provides a simple date object. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Date::Simple-3.03

  • http://www.cpan.org/authors/id/I/IZ/IZUT/Date-Simple-3.03.tar.gz
    MD5 sum: 436049dc2c7dfd8423d8bcc807248b31

Encode::EUCJPASCII-0.03

Encode::EUCJPASCII provides an eucJP-open mapping. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Encode-EUCJPASCII-0.03

  • http://www.cpan.org/authors/id/N/NE/NEZUMI/Encode-EUCJPASCII-0.03.tar.gz
    MD5 sum: 5daa65f55b7c2050bb0713d9e95f239d

Encode::HanExtra-0.23

The Encode::HanExtra module provides extra sets of Chinese Encodings. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Encode::HanExtra-0.23

  • http://www.cpan.org/authors/id/A/AU/AUDREYT/Encode-HanExtra-0.23.tar.gz
    MD5 sum: e1d3bc32c1c8ee304235a06fbcd5d5a4

Encode::JIS2K-0.02

The Encode::JIS2K module provides JIS X 0212 (aka JIS 2000) Encodings. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Encode::JIS2K-0.02

  • http://www.cpan.org/authors/id/D/DA/DANKOGAI/Encode-JIS2K-0.02.tar.gz 
    MD5 sum: 00e73ee943fb2f882b00b7b61e4c9db1

File::Slurp-9999.19

The File::Slurp module provides Simple and Efficient Reading/Writing/Modifying of Complete Files. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • File::Slurp-9999.19

  • http://www.cpan.org/authors/id/U/UR/URI/File-Slurp-9999.19.tar.gz
    MD5 sum: 7d584cd15c4f8b9547765eff8c4ef078

File::Which-1.09

File::Which provides a portable implementation of the 'which' utility. This module and its dependencies use the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

HTML::Parser-3.71

The HTML::Parser distribution is a collection of modules that parse and extract information from HTML documents. This module and the dependency modules use the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • HTML::Parser-3.71

  • http://www.cpan.org/authors/id/G/GA/GAAS/HTML-Parser-3.71.tar.gz
    MD5 sum: 9128a45893097dfa3bf03301b19c5efe

    • HTML::Tagset
      (http://search.cpan.org/~petdance/HTML-Tagset/)

    • libwww-perl-6.13 (circular; howevever, it can be installed after HTML::Parser as it is only a run-time requirement for the included HTML::HeadParser module)

IPC::Run3-0.048

The IPC::Run3 module is used to run a subprocess with input/ouput redirection. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • IPC-Run3-0.048

  • http://www.cpan.org/authors/id/R/RJ/RJBS/IPC-Run3-0.048.tar.gz
    MD5 sum: 85b36bcd2fd2450718ee14f894f0d3d1

libwww-perl-6.13 (a.k.a. Bundle::LWP)

The libwww-perl (Bundle::LWP) collection is a set of Perl modules which provide a simple and consistent application programming interface to the World-Wide Web. The main focus of the library is to provide classes and functions that allow you to write WWW clients. The library also contains modules that are of more general use and even classes that help you implement simple HTTP servers. The LWP collection and all its dependency modules use the standard build and installation instructions. The dependencies should be installed in the order listed below. Ensure you install the dependency chain for each module before installing the modules.

This package is known to build and work properly using an LFS-7.7 platform.

After the LWP installation, if you want HTTPS protocol support, install the following (application and modules):

List::AllUtils-0.09

The List::Allutils module combines List::Util and List::MoreUtils in one bite-sized package. This module and its dependencies use the standard build and installation instructions.

This package will fail (tests, but not for any obvious reason, and at runtime) if the core module List::Util is older than 1.31, as happens with e.g. with perl-5.18.2 from LFS-7.5. To test the version, you can run the following command

strings /usr/lib/perl5/5.*/*/auto/List/Util/Util.so | grep v5 -A 1 | tail -n 1

and if necessary install Scalar::List::Utils (http://search.cpan.org/dist/Scalar-List-Utils/) to get a newer version of that module without updating all of perl.

This package is known to build and work properly using an LFS-7.7 platform.

  • List::AllUtils-0.09

  • http://www.cpan.org/authors/id/D/DR/DROLSKY/List-AllUtils-0.09.tar.gz
    MD5 sum: 3e2dfeeef80c4e1952443c6b7d48583c

Log-Log4perl-1.46 (a.k.a. Log::Log4perl)

Log-Log4perl provides a Log4j implementation for perl. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Log-Log4perl-1.46

  • http://www.cpan.org/authors/id/M/MS/MSCHILLI/Log-Log4perl-1.46.tar.gz
    MD5 sum: d247d2327d7f32dca09cbeb51a953fc5

Net::DNS-0.82

Net::DNS is a DNS resolver implemented in Perl. It can be used to perform nearly any type of DNS query from a Perl script. The Net::DNS module and all its dependencies are installed using the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Net::DNS-0.82

  • http://www.cpan.org/authors/id/N/NL/NLNETLABS/Net-DNS-0.82.tar.gz
    MD5 sum: 95660d1f81ddd087639a6ea13ffff2b8

    • Digest::HMAC
      (http://search.cpan.org/~gaas/Digest-HMAC/) (required by the testsuite)

    • IO::Socket::INET6
      (http://search.cpan.org/~shlomif/IO-Socket-INET6-2.72/) (required for IPv6 support)

    • IO::Socket::INET
      (http://search.cpan.org/~gbarr/IO/lib/IO/Socket/INET.pm) (required for IPv6 support)

      • Socket6
        (http://search.cpan.org/~umemoto/Socket6/)

Readonly::XS-1.05

The Readonly::XS module is a companion module for Readonly.pm, to speed up read-only scalar variables. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

Regexp::Common-2013031301

Regexp::Common provides commonly requested regular expressions. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Regexp-Common-2013031301

  • http://www.cpan.org/authors/id/A/AB/ABIGAIL/Regexp-Common-2013031301.tar.gz
    MD5 sum: 2b9c335312dcfd9980ff7acbad0e5905

SGMLSpm-1.1

The SGMLSpm module is a Perl library used for parsing the output from James Clark's SGMLS and NSGMLS parsers. This modules uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

Before beginning the build, issue the following command to prevent an error:

chmod -v 644 MYMETA.yml

After the package has been installed, run the following command as the root user:

ln -sv sgmlspl.pl /usr/bin/sgmlspl
  • SGMLSpm-1.1

  • http://anduin.linuxfromscratch.org/sources/BLFS/conglomeration/perl-modules/SGMLSpm-1.1.tar.gz
    MD5 sum: 746c74ae969992cedb1a2879b4168090

Test-Command-0.11 (Test::Command)

This module tests the exit status, STDOUT, or STDERR, of an external command. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Test-Command-0.11

  • http://www.cpan.org/authors/id/D/DA/DANBOO/Test-Command-0.11.tar.gz
    MD5 sum: 9ab83c4695961dbe92cd86efe08f0634

Text::BibTeX-0.70

Text::BibTeX provides an interface to read and parse BibTeX files. This module uses the instructions for packages using Build.PL, but except where noted, its dependencies are installed using the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

Unicode::Collate-1.11

Unicode::Collate provides a Unicode collation algorithm. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • Unicode-Collate-1.11

  • http://search.cpan.org/CPAN/authors/id/S/SA/SADAHIRO/Unicode-Collate-1.11.tar.gz
    MD5 sum: 982f6d811b522656de0ae9eea0df47a1

Unicode::LineBreak-2014.06

Unicode::LineBreak provides a UAX #14 Unicode Line Breaking Algorithm. This module and its dependencies use the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

URI-1.65

This module implements the URI class. Objects of this class represent "Uniform Resource Identifier references" as specified in RFC 2396 (and updated by RFC 2732). A Uniform Resource Identifier is a compact string of characters that identifies an abstract or physical resource. A Uniform Resource Identifier can be further classified as either a Uniform Resource Locator (URL) or a Uniform Resource Name (URN). The distinction between URL and URN does not matter to the URI class interface. A "URI-reference" is a URI that may have additional information attached in the form of a fragment identifier. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • URI-1.65

  • http://www.cpan.org/authors/id/E/ET/ETHER/URI-1.65.tar.gz
    MD5 sum: 12c5d612a20ddd42041a5aa426f66269

XML::LibXML::Simple-0.95

The XML::LibXML::Simple module is a rewrite of XML::Simple to use the XML::LibXML parser for XML structures,instead of the plain Perl or SAX parsers. This module and all dependency modules use the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

XML::LibXSLT-1.94

The XML::LibXSLT module provides an interface to libxslt. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

XML::Simple-2.20

The XML::Simple module is a Perl extension that provides an easy API to read and write XML (especially config files). This module and all dependency modules use the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • XML::Simple-2.20

  • http://cpan.org/authors/id/G/GR/GRANTM/XML-Simple-2.20.tar.gz
    MD5 sum: 4d10964e123b76eca36678464daa63cd

    • XML::SAX
      (http://search.cpan.org/~grantm/XML-SAX/)
      (Note: this package does not support parallel build)

    • XML::SAX::Expat
      (http://search.cpan.org/~bjoern/XML-SAX-Expat/)
      (Note: this package does not support parallel build)

    •  XML::LibXML
      (http://search.cpan.org/~shlomif/XML-LibXML/)
      (recommended for faster parsing)

    • Tie::IxHash
      (http://search.cpan.org/~chorny/Tie-IxHash/)
      (optionally used in the test suite)

XML::Writer-0.625

XML::Writer provides a Perl extension for writing XML documents. This module uses the standard build and installation instructions.

This package is known to build and work properly using an LFS-7.7 platform.

  • XML::Writer-0.625

  • http://www.cpan.org/authors/id/J/JO/JOSEPHW/XML-Writer-0.625.tar.gz
    MD5 sum: b9c2420c243c6a36ce45a008740fcede

Standard Installation of Perl Modules

Install Perl modules by running the following commands:

perl Makefile.PL &&
make &&
make test

Now, as the root user:

make install
[Note]

Note

When reinstalling a Perl module, sometimes older versions of the module being reinstalled are in other directories specified in @INC. To delete all other versions of the module being reinstalled (not simply older ones) set the UNINST variable:

make install UNINST=1

Installation of Perl Modules which use Build.PL

Install Perl modules which use Build.PL by running the following commands:

perl Build.PL &&
./Build &&
./Build test

Now, as the root user:

./Build install

(Alternate) Auto Installation of Perl Modules.

There is an alternate way of installing the modules using the cpan shell install command. The command automatically downloads the source from the CPAN archive, extracts it, runs the compilation, testing and installation commands mentioned above, and removes the build source tree. You may still need to install dependent library packages before running the automated installation method.

The first time you run cpan, you'll be prompted to enter some information regarding download locations and methods. This information is retained in files located in ~/.cpan. Start the cpan shell by issuing 'cpan' as the root user. Any module may now be installed from the cpan>  prompt with the command:

install <Module::Name>

For additional commands and help, issue 'help' from the cpan>  prompt.

Alternatively, for scripted or non-interactive installations, use the following syntax as the root user to install one or more modules:

cpan -i <Module1::Name> <Module2::Name>

Review the cpan.1 man page for additional parameters you can pass to cpan on the command line.

Last updated on 2015-02-24 00:00:51 -0500